Wednesday, October 16, 2013

Archive - PSA: How to Store Action Figures Like a Boss


(Edit: This needed to be re-posted.  You can never be too informed!)

I received a shipment from one of my favorite companies today.  No, not BBTS (but they're one of my favorite places to get shipments from, too).  It's the company I order action figure storage supplies from.  So I figured this would be a good opportunity to drop some knowledge and do a PSA.  Ready?  I'm going to teach you how to not ruin your action figures by storing them.  I'm going to teach you how to store action figures like a pro.  Like a boss.




If you're like me, you have a lot of action figures.  I mean a LOT of action figures.  It would be awesome if we could just have them all displayed on shelves at home all the time, but that's rarely practical.  Especially for those of us who value also having girlfriends/wives/significant others and/or kids.  When you've been in the action figure collecting game for as long as some of us, there comes a time where you have to start thinking about storage.

Believe it or not, there IS a wrong way to store our plastic men.  I learned this first hand a few years ago.  Many people, including myself, may assume that storing action figures in plastic ziploc-type bags is a good idea.  And it is.  As long as you don't use the vast majority of bags out there.

The vast majority of plastic zip-bags, especially those purchased in the grocery store, Target, Walmart, whatever, are not meant for long term storage.  The plastic these bags are made from is acidic.  For storing a sandwich in your fridge, this isn't a problem.  For storing an action figure and it's accessories for short periods of time, it's also not a problem.  But when you use these bags to store figures for years, like many do (and I used to), the acid in the plastic will eventually damage and destroy the paint and eventually the plastic of the figure itself.

About three years ago, I was going through bins of older Star Wars figures (POTF2 - POTJ era), deciding what I wanted to part with to thin out my collection.  I started un-bagging the figures to take photos, and discovered that many of them felt sticky.  The plastic had started to decompose thanks to the acid in the bags.  I had a couple hundred figures that were effectively destroyed thanks to this.  This event sent me on a quest, to discover a safer way to store plastic.



I found a company called GTZip, a wholesaler of storage bags in various shapes, sizes and materials. One of their lines of bags, the Ultra Clear line, are made of a material called polypropylene.  Polypropylene is an acid-free, archival-quality plastic, used by museums and other institutions to protect and store materials that should not be allowed to wear and tear.

GTZip offers their Ultra Clear bags in a variety of sizes, at affordable wholesale pricing (though the smallest quantity you can order of any size is 1,000 pieces).  I find that for the vast majority of my 3 3/4" figures, the 3" x 5" bags fit nicely, and allow plenty of room for accessories to be stored in the bag as well.  For some beefier figures, like Marvel Universe Thor, a 4" x 6" bad works better.  And for really beefy figures, like Hulk, you'll want to use a 5" x 7".  For Marvel Legends, or other 6" scale figure lines, you'll want to go with at least a 5" x 8".


I've been using these bags for a few years now, and have not had a single figure start to decompose on me.  These acid-free bags will protect your figures for years and years.  I've ordered from GTZip a few times now, and their service is always great.  Since they're here in California with me, I usually get my bags the day after I order them.


The 3" x 5" will hold a Zombie Viper and his accessories.
Or Renegades Storm Shadow...
...and his many, many weapons.

Once you've got your individual figure storage needs sorted out, what do you do with all those bagged figures?  I like to keep mine in 15-18 quart sized bins, which are easily found at Target or other department stores.  I organize my figures by line, series, etc, but organization is entirely up to you.  The surface that touches the figures directly (the bags) is the most important, but a few other points to remember:  Don't store your figures in extreme heat or cold, or extreme humidity.  I prefer to store mine in my home, but if you must store them in a garage, keep them out of direct sunlight and extreme temperatures.  Heat, cold, humidity, and ultra-violet light will all damage plastic over time (this is why so many white plastic figures turn yellow over time).


So there you go.   You now know how to store your toys properly.  The relatively small cost of buying a thousand (or several) polypropylene bags is nothing compared to the potential cost of replacing an entire collection when it degrades over time.

You're welcome.

-Zak.  I'm a real doctor.  From America.








7 comments:

  1. Just to throw it out there for anyone who wants to know, most hobby stores (Hobby Lobby) sell a similar acid free bag made for storing photographs. That's the first place I saw them for sale.

    ReplyDelete
  2. Is the Plain 2 Mil thick enough? or did u get the Heavyweight 4 Mil ultra clear bags? oh, and Hang & Vent holes? or no holes at all? just wondering what would work best.

    oh, and i have a lot of WWE figures (some in a 6" scale, some in a 7" scale), so I'm guessing the bags I'd have to get would be 5x10 or 5x12 (or 6x9?), right?

    ReplyDelete
    Replies
    1. 2 mil should be fine if you're not constantly knocking the bagged figures around or removing them and replacing them in the bags. If the bags are going to see a lot of action, you might want the 4 mil just for the extra protection. Vent holes are fine and probably not a bad idea, just be careful not to lose any small accessories through them. As for sizes, I like to leave some room for getting the figures and accessories comfortable in and out of the bags, so for most 6-7" scale figures, I use the 6x9's.

      Delete
    2. Thanks for the reply! Much appreciated. Hopefully I can get a bunch of those bags soon. Thanks for (re-)posting this article.

      Delete
  3. What size would you recommend for Star Wars Kenner Vintage figures?

    ReplyDelete
    Replies
    1. 3x5's should fit just about any vintage Star Wars figure, but I prefer 4x6's for most of my 3.75" figures. Extra room for accessories or unusually large figures is not a bad thing.

      Delete
  4. hi, what size would you recommend for wwf hasbro figures ?

    ReplyDelete